Subversion Notes

We switched from using CVS to Subversion as our source control mechanism in mid October 2009.

• We did not try to import all of the CVS history.
• The initial import includes all of the 2.11.0 release source plus the updated source code since the release (the state of CVS on 2009-10-14).
• We left the CVS repository alone (in case we ever wanted to refer back for older history).

Preparing Development Machine

As a developer, the following things must be done to your development machine before you will be able to check out, build and commit changes to the NST source code.

Set SVNROOT

You need to set the SVNROOT variable. Add the following to your ~/.bashrc or ~/.bash_profile configuration file:

export SVNROOT=https://nst.svn.sourceforge.net/svnroot/nst

After the SVNROOT variable is set, you should be able to run Subversion commands. For example the following shows the directories under SVNROOT.

[pkb@sprint ~]$ export SVNROOT=https://nst.svn.sourceforge.net/svnroot/nst
[pkb@sprint ~]$ svn ls ${SVNROOT}
trunk/
[pkb@sprint ~]$ 

gnome-keyring

Subversion might complain about needing to store passwords in a unencrypted form. To prevent this, we need to figure out how to enable the gnome-keyring add-on. To do this, edit the file ~/.subversion/config and search on the string password-stores. Most likely this will be commented out in your current configuration file. I updated mine to the following:

password-stores = gnome-keyring

However, this was not enough to prevent me from being prompted each time. I then added the following package:

yum install subversion-gnome

We will see if this permits us to store the password or not (you may need to be logged into a GNOME desktop in order to make use of the gnome-keyring feature).

Directory Structure

Currently the directory structure under Subversion is fairly straight forward. We use trunk as the current working area (this is what most developers will be checking out from and committing to). When we have a release, we will copy trunk to the release number. For example, to create the 2.13.0 release, we would run the following Subversion command:

svn copy ${SVNROOT}/trunk ${SVNROOT}/releases/2.13.0

We would also run the following command for maintenance updates to the 2.13.0 release:

svn copy ${SVNROOT}/trunk ${SVNROOT}/maintenance/2.13.0

Subversion Commands

Use the following to get the list of available subversion commands:

svn help

To get more information about a specific Subversion command (like ls), run:

svn help ls

Checking Out Code

To make the initial checkout of the current source code into a sub-directory named nst, you can use the following Subversion command:

svn co ${SVNROOT}/trunk nst

Committing Code

You use the commit subversion command when you want to commit changes to the source code.

When you first run commit, it may prompt you for the password for the incorrect user ID. If this happens, press the Enter key without specifying a password. This should allow you enter your SourceForge user ID followed by your SourceForge password when committing changes. For example:

[root@fedora11 nightly]# svn commit
Authentication realm: <https://nst.svn.sourceforge.net:443> SourceForge Subversion area
Password for 'root': 
Authentication realm: <https://nst.svn.sourceforge.net:443> SourceForge Subversion area
Username: SOURCEFORGE_LOGIN_ID
Password for 'SOURCEFORGE_LOGIN_ID': 
Sending        nightly/nightly-build.bash
Sending        nightly/nightly2html.xsl
Sending        nightly/nightly2txt.xsl
Transmitting file data ...-----------------------------------------------------------------------
ATTENTION!  Your password for authentication realm:

   <https://nst.svn.sourceforge.net:443> SourceForge Subversion area

can only be stored to disk unencrypted!  You are advised to configure
your system so that Subversion can store passwords encrypted, if
possible.  See the documentation for details.

You can avoid future appearances of this warning by setting the value
of the 'store-plaintext-passwords' option to either 'yes' or 'no' in
'/root/.subversion/servers'.
-----------------------------------------------------------------------
Store password unencrypted (yes/no)? no 

Committed revision 4.
[root@fedora11 nightly]#

Status

The Subversion status command is very handy at showing not only what files you've modified, but also (when including the -u option) handy at showing what files have changed in the repository:

svn status -u

For help about the output of svn status, run:

svn help status | less

Revert

If you've made modifications to a file which you want to discard, use the revert command to restore the original version:

svn revert FILENAME

Ignoring Files

Under CVS, you could edit the file .cvsignore to tell CVS to ignore certain files within the directory. Subversion has a similar, but different mechanism for ignoring files. Basically, you change to the directory where the files/directories to be ignored exist and run the following command:

svn propedit svn:ignore .

Running the above command should pull up a text editor and allow you to specify file name patterns to specify what files and directories should be ignored. Here is an example ignore list which causes Subversion to ignore any file or directory ending with the extension .log or having the name tmp:

*.log
tmp

Related Links

http://nst.svn.sourceforge.net/viewvc/nst

Use this link to browse the NST Subversion repository (the 'trunk' folder corresponds to the current development tree).

http://sourceforge.net/apps/trac/nst/

Use this link to access the NST Trac Wiki (for development). It has its own source browser as well as tracking commits via the Timeline.