NST USB FAQ
USB General
Can all systems boot from a USB device?
No. In order to boot from a USB device, the BIOS in your system must be capable of booting from a USB drive. In addition, depending on your BIOS, it may only be able to boot from a USB drive.
This varies from system to system. Try F10 or F12. Sometimes a BIOS won't offer a boot chooser keyboard shortcut. In this case you'll need to enter your BIOS setup utility (F2 or Delete keys are common) and change the boot order such that USB drives are checked first.
Can all USB Drives be booted from?
No. While most USB drives can be booted from, it is our understanding that the ability to boot from a USB drive is not necessarily a requirement (that being said, I'm not sure we've run across a drive which can not be booted from).
What are the different ways to boot NST from a USB device?
There are three different ways in which you can boot the NST from a USB device:
- A USB Live boot without a persistence overlay requires the least amount of space and behaves almost identically to booting from the ISO image burned to a DVD.
- A USB Live Persistence boot is similar to a USB Live boot with the addition of a persistence overlay. This is a bit like a hybrid between a Live boot and a full hard disk installation (updates to the system will persist between boots, but you will periodically need to start over).
- A USB Full Install boot is very similar to a full hard disk installation.
Can a Mac Mini 2009 boot the NST from a USB device?
While the Mac Mini can boot the NST from a ISO image burned onto a DVD, it can not boot a NST distribution on a USB attached drive.
What is the performance hit when booting from a USB Flash drive?
It depends upon the USB Flash drive (speeds will differ). Typically USB Flash drives will offer good read performance (15 to 25 MB/sec), but not so great write performance (5 to 10 MB/sec).
Here are a couple of links related to speed tests that will be influencing my next purchase:
USB Flash Drive Comparison – 21 Tested and Compared
16gb USB Drive Comparison – 17 Drives Compared
USB Live
What is the minimum size memory stick for a USB Live boot?
2 GB (if you could find a 1.5GB USB memory stick it would probably work as well).
Does a USB Live boot remember changes between boots?
No. You need a USB Live Persistence or USB Full Install boot if you want to remember changes to the systems between reboots.
USB Live Persistence
What is the minimum size memory stick for a USB Live Persistence boot?
2 GB. However, this will limit you to roughly 0.5 GB for your persistence layer.
Does a USB Live Persistence boot remember changes between boots?
Yes - until you fill the persistence layer. Using this boot method, you NST system will gradually consume memory in the persistence layer. Once all of the memory in the persistence layer is consumed, you will need to clear the entire persistence layer and start over from the initial ISO boot.
USB Full Install
What is the minimum size memory stick for a USB Full Install?
8 GB.
Does a USB Full Install remember changes between boots?
Yes - a USB Full Install behaves pretty much the same as a normal USB hard disk installation.
Why does a yum update take so long on a USB Full Install?
We don't know the answer to this question. We think it is something to the way the update process is implemented and it is quite annoying.
