HowTo Setup Suricata - A Simple Live Configuration
Overview
Suricata is a multi-threaded intrusion detection/prevention engine. This page shows one how to configure suricata to "run in pcap live mode" for detecting ICMP packets and generating alerts with a simple ICMP Ping rule.
Configuration - Rule File
We will create a simple rule file for ICMP detection in directory: "/opt" with a file name: "icmp.rules". Documentation for setting up suricata rules can be found: here.
[root@probe tmp]# cat /opt/icmp.rules alert ip any any <> any any (msg: "ICMP Ping"; ip_proto: icmp; sid: 1000001;)
Configuration - Suricata
One needs to add the location of the ICMP rules file to the suricata configuration file: "/etc/suricata.yaml". This is done in the "rule-files" section.
Before:
rule-files: - suricata.rules
After:
rule-files: - suricata.rules - /opt/icmp.rules
Start Suricata
Start suricata in "run in pcap live mode". Example interface and hosts: Suricata Interface: ens34, Suricata Host: 10.222.222.252, Ping Host: 10.222.222.251.
Suricata host command line (Start up suricata):
[root@probe tmp]# suricata -i ens34 i: suricata: This is Suricata version 7.0.4 RELEASE running in SYSTEM mode i: threads: Threads created -> W: 4 FM: 1 FR: 1 Engine started.
Ping Suricata Host
Ping suricata host: (Done from command line on host: 10.222.222.252) [nst@dev40 dev40]$ ping 10.222.222.252
PING 10.222.222.252 (10.222.222.252) 56(84) bytes of data. 64 bytes from 10.222.222.252: icmp_seq=1 ttl=64 time=0.303 ms 64 bytes from 10.222.222.252: icmp_seq=2 ttl=64 time=0.376 ms 64 bytes from 10.222.222.252: icmp_seq=3 ttl=64 time=0.383 ms --- 10.222.222.252 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2081ms rtt min/avg/max/mdev = 0.303/0.354/0.383/0.036 ms
Stop Suricata
Use "Ctrl-C" to stop the suricata process:
^Ci: suricata: Signal Received. Stopping engine. i: device: ens34: packets: 441, drops: 0 (0.00%), invalid chksum: 0 [root@probe tmp]#
Review the Suricata Alert Log
By default the alerts generated by suricata can be found in file: "/var/log/suricata/fast.log". Note that two (2) alerts for this flow were detected. Our ICMP rules files was configured to detect bi-directional ICMP packets.
[root@probe tmp]# cat /var/log/suricata/fast.log
04/24/2024-11:56:22.857567 [**] [1:1000001:0] ICMP Ping [**] [Classification: (null)] [Priority: 3] {ICMP} 10.222.222.251:8 -> 10.222.222.252:0
04/24/2024-11:56:22.857625 [**] [1:1000001:0] ICMP Ping [**] [Classification: (null)] [Priority: 3] {ICMP} 10.222.222.252:0 -> 10.222.222.251:0
